Service Tel:
中文PRODUCTS
- Mechanical seal of boiler feed pump
- Mechanical seal of circulating pump
- Slurry pump mechanical seal
- Mechanical seal of desulfurization
- Mechanical seal of agitator
- Compressor mechanical seal
- Sewage pump mechanical seal
- Chemical pump mechanical seal
- Metal bellows mechanical seal
- Heat conduction oil pump mechanical
- Mechanical seal of sanitary pump
- Clean water pump mechanical seal
- Mechanical seal of booster pump
- Air-conditioning pump mechanical se
- Mechanical seal of reaction kettle
- Mechanical seal of Chinese standard
- Mechanical seal of paper pulp pump
- Mechanical seal of pressure screen
- Water pump accessories
C8B, CBU series mechanical seals from 58B, 58U variants. The auxiliary sealing material of this series is rubber "0" ring. If the suffix is (V), the V-shaped PTFE sealing ring structure is adopted. The auxiliary seal is interchangeable, and the setting screw is used for positioning. The structure is simple and compact. The optimized seal face has the advantage of high comprehensive performance. The derived model C8BKC series adopts fluid dynamic pressure design, especially suitable for light hydrocarbon and high pressure hot water conditions. This series of mechanical seals can be applied to: water, hydrocarbon, low viscosity oil, low concentration of acid and alkali medium solution.
Working parameters
Rules: 20 ~ 100 mm
Pressure: 4.0 Mpa or less
The temperature: - 20-220 ℃
Wire speed: ≤25m/s
Axial channeling momentum: ±0.5mm
Material combination
Sealing end face: graphite, silicon carbide, tungsten carbide, alumina ceramics
Auxiliary sealing: nitrile rubber, fluorine rubber, ethylene rubber
Metal component: SUS304, SUS316L
The product description
Single face internal flow
balanced
The composite transmission
Arbitrary spin to
Comply with EN12756(DIN24960) standards
In the development and design of any product, we follow the principle of installation size standardization. That is, the installation ruler of this type of mechanical seal is in accordance with international and domestic (API610, API682, DIN24960, ISO3069, GB6556).
