Service Tel:
中文PRODUCTS
- Mechanical seal of boiler feed pump
- Mechanical seal of circulating pump
- Slurry pump mechanical seal
- Mechanical seal of desulfurization
- Mechanical seal of agitator
- Compressor mechanical seal
- Sewage pump mechanical seal
- Chemical pump mechanical seal
- Metal bellows mechanical seal
- Heat conduction oil pump mechanical
- Mechanical seal of sanitary pump
- Clean water pump mechanical seal
- Mechanical seal of booster pump
- Air-conditioning pump mechanical se
- Mechanical seal of reaction kettle
- Mechanical seal of Chinese standard
- Mechanical seal of paper pulp pump
- Mechanical seal of pressure screen
- Water pump accessories
UK series mechanical seals for built-in, single spring, balance type, drive pin drive; Rotating ring sealing ring using U-shaped sealing ring, good self-tightening performance, reliable sealing, stable performance, according to different working conditions need to choose different materials, different friction pair material and structure. It can also be cooled and washed according to AP1610 standard.
Working parameters
Rules: 39.5 ~ 115.5 MM
Pressure: 1.5 Mpa or less
The temperature: - 30-180 ℃
Wire speed: ≤15m/s
Axial channeling momentum: ±0.5mm
Material combination
Sealing end face: graphite, silicon carbide, tungsten carbide, alumina
Auxiliary sealing: nitrile rubber, fluorine rubber, ethylene rubber, silicone rubber
Metal components: stainless steel, SUS304, SUS316L
The product description
Single face
The balanced
Arbitrary rotation
Comply with EN12756(DIN24960) standards
In the development and design of any product, we follow the principle of installation size standardization. That is, the installation ruler of this type of mechanical seal is in accordance with international and domestic (API610, API682, DIN24960, ISO3069, GB6556).
